Panasonic SD-ZB2512 Kneading mounting shaft - ADA29E165
Panasonic SD-ZB2512 Kneading mounting shaft - ADA29E165
Panasonic SD-ZB2512 Kneading mounting shaft - ADA29E165
Panasonic SD-ZB2512 Kneading mounting shaft - ADA29E165
Panasonic SD-ZB2512 Kneading mounting shaft - ADA29E165
Roll over image to zoom in Click on image to zoom
Panasonic SD-ZB2512 Kneading mounting shaft - ADA29E165Panasonic SD-ZB2512 Kneading mounting shaft - ADA29E165Panasonic SD-ZB2512 Kneading mounting shaft - ADA29E165Panasonic SD-ZB2512 Kneading mounting shaft - ADA29E165Panasonic SD-ZB2512 Kneading mounting shaft - ADA29E165

Panasonic SD-ZB2512 Kneading mounting shaft - ADA29E165

Save 5%
PanasonicSKU: PAN.BRE.ADA29E165-D3
Price:
£38.72 £40.82
Stock:
In stock (4 units), ready to be shipped

Description

Mounting shaft and bearing for Panasonic breadmaker oven breadpans.

Genuine Panasonic replacement part.

Part number: ADA29E165 or ADA29E1651

Mounting shaft and bearing assembly for Panasonic breadmaker oven breadpans.
Note: Does not include replacement rubber "O" ring or mounting screws, (available separately).

Suitable for:
SD-ZB2512

Please note. Sometimes customers report back that the new mounting shaft or kneading blade are a loose fit once assembled. We have approached Panasonic about this and have been informed that for 2 reasons the kneading blade may be a loose fit on the mounting shaft: Firstly, that the blade is manufactured to allow for the sometimes uneven non stick coating to be applied and secondly, that the blade always rotates in one direction only so despite being loose will not wear excessively as the drive is in the same direction always. We recommend therefore that the blade or mounting shaft should not be replaced simply because they seem to be a loose fit.

You may also like

Popular Products

Customer Reviews

Based on 4 reviews
75%
(3)
0%
(0)
0%
(0)
25%
(1)
0%
(0)
T
TJToms
Panasonic SD-ZB2512 Kneading mounting shaft - ADA29E165

Unfortunately these days manufacturers make it so difficult to take anything apart to replace the actual component that needs doing. In this respect we just needed to grease the shaft to free it up, but despite attempts we were unable to gain access, and we are pretty hard-core DIY fixers.
So - it was great to be able to get a replacement part to fix the breadmaker rather than have to junk the whole machine, but not the plan. This company at least had a part, although not cheap, and we would definitely use again for other items if required.

Dear valued customer,

Thank you for taking the time to leave a review for the Panasonic SD-ZB2512 Kneading mounting shaft - ADA29E165. We apologize for the difficulty you experienced in trying to access and grease the shaft. We understand how frustrating this can be, especially for DIY fixers like yourself. We are glad that our replacement part was able to help you fix your breadmaker instead of having to replace the whole machine. We appreciate your feedback and hope to continue serving you in the future.

Best regards,

D
David Stocks
Didn't fit.

It looks like a genuine item and is well made. I checked before buying that my model was listed but, unfortunately, the part supplied had a single little metallic protusion on the mating face (obviously by design), that my original one didn't, so it wouldn't fit. I was able to machine it off using a Dremel, so I didn't have to return it. The can also has a heat-resistant o-ring, which, as with most seals, should be renewed. However, this wasn't supplied as part of the "kit". (It's fitted now so I can't supply a picture.)

Thank you for your feedback. The small lug is part of the design so the shaft can only be fitted one way in order that the pan then locks into the machine during use. If fitted in the correct way - without that lug it could go 3 possible ways only one of which will then fit the machine when you fit the pan assembly and try to lock it in.
On earlier models Panasonic supplied new screws and a new oring with the shaft on current versions they don't. Those parts are listed on oour site as associated items though.

A
Alex.

I used this kneading shaft to fix my Panasonic bread maker bucket that had started leaking.

Hi there! We're so glad to hear that our kneading shaft helped fix your bread maker bucket. We strive to provide high-quality products that make baking easier. Thank you for your review! Have a wonderful day.

P
Philip L.

Worked perfectly. Much better than buying a new bin. Thank you.